Have you ever woken up in the morning feeling like you’ve been wrestling with a grizzly bear all night? If so, it’s possible that your Sleep Number bed is not properly adjusted. Making adjustments to your bed is easy if you know how to take it apart. While it may seem like a daunting task, taking apart a Sleep Number bed is actually quite simple. With a few simple steps, you can have your bed disassembled and ready to adjust in no time.
The first step is to remove the mattress from the frame. To do this, simply unhook the head and foot of the mattress from the frame. Once the mattress is removed, you can begin to disassemble the frame. The frame is held together by a series of screws and bolts. Simply remove these screws and bolts, and the frame will come apart easily. Once the frame is disassembled, you can adjust the air chambers in the mattress to your desired firmness. To do this, simply use the included pump to inflate or deflate the air chambers until you reach the desired firmness. Once you have adjusted the air chambers, simply reassemble the bed frame and reattach the mattress.
Taking apart a Sleep Number bed is a simple process that can be completed in just a few minutes. By following these simple steps, you can easily adjust the firmness of your bed to get a great night’s sleep. However, if you are having trouble taking your bed apart, it is always best to consult the manufacturer’s instructions for specific guidance.
Dismantling the Headboard and Footboard
1. Unzip the Headboard and Footboard Covers
Locate the zipper at the bottom of the headboard and footboard covers. Gently unzip the covers, taking care not to damage the fabric. Once the covers are unzipped, remove them from the headboard and footboard.
If the headboard or footboard covers are attached with Velcro, carefully peel away the Velcro strips to detach the covers.
2. Remove the Headboard and Footboard Adjusters
Identify the headboard and footboard adjusters. These are usually located on the back of the headboard and footboard. Use a wrench or Allen key to loosen the bolts or screws that secure the adjusters.
Once the bolts or screws are loosened, carefully remove the adjusters. Note that some adjusters may be attached to the frame with wires. If this is the case, disconnect the wires before removing the adjusters.
3. Separate the Headboard and Footboard from the Frame
Once the adjusters are removed, the headboard and footboard can be separated from the frame. To do this, carefully lift the headboard or footboard up and away from the frame. Be sure to support the weight of the headboard or footboard as you lift it.
Detaching the Side Rails
The side rails are the metal frames that attach to the base of the bed and support the mattress. To detach them:
Detaching the Air Chambers
The air chambers are the inflatable tubes that support the mattress. To detach them:
Note: Do not use sharp objects or scissors to cut the air tubes, as this could damage the bed.
Detaching the Headboard and Footboard
The headboard and footboard are the decorative panels that attach to the side rails. To detach them:
Table: Screw Sizes for Headboard and Footboard
| Panel | Screw Size |
|---|---|
| Headboard | 6 x 3/4″ |
| Footboard | 6 x 1/2″ |
Removing the Mattress
Taking apart a Sleep Number bed is not a difficult task, but it does require some patience and care. The first step is to remove the mattress from the base. To do this, simply unhook the mattress from the headboard and footboard. The mattress is then lifted off the base and placed on its side.
Once the mattress is removed, you will need to disassemble the base. The base consists of two side rails and a headboard and footboard. The side rails are held in place by bolts, which can be removed with a wrench. The headboard and footboard are also held in place by bolts, but these can be removed with a screwdriver.
Separating the Air Chambers
The air chambers are the most important part of the Sleep Number bed, as they are what provide the support and comfort. To separate the air chambers, you will need to:
- Locate the air chambers. The air chambers are located on the bottom of the bed, and they are connected by a hose.
- Disconnect the hose. Once you have located the air chambers, you will need to disconnect the hose that connects them. To do this, simply pull the ends of the hose apart.
- Remove the air chambers. Once you have disconnected the hose, you will be able to remove the air chambers from the bed. To do this, simply lift the air chambers up and out of the bed.
- Separate the air chambers. Once you have removed the air chambers from the bed, you will need to separate them. To do this, simply pull the air chambers apart. Be careful not to damage the air chambers when you are separating them.
Air Chamber Details Value Number of air chambers 2 Size of each air chamber Twin XL Material of air chambers Polyurethane Unzipping the Ticking
Step 1: Remove the Mattress Topper
Gently lift the mattress topper off the base and set it aside.
Step 2: Locate the Zipper
On the side of the mattress cover, find the zipper that runs along the entire length of the mattress.
Step 3: Unzip the Zipper
Using both hands, slowly and carefully unzip the zipper. Make sure to keep the material taut to avoid tearing.
Step 4: Separate the Foam Layers
Once the zipper is fully unzipped, gently lift the foam layers from each other. Be careful not to rip or damage the foam.
Step 5: Unzip the Individual Foam Layer Zippers
Some Sleep Number beds have individual zippers on each foam layer. To access the air chambers, follow these steps:
- Locate the zippers on the sides of each foam layer.
- Carefully unzip each zipper, keeping the material taut.
- Once unzipped, gently lift the foam layer to expose the air chambers.
Foam Layer Number of Air Chambers Base Layer 1 Comfort Layer 2 Pillow Top Layer (if applicable) 1 Rolling Up the Mattress
Step 1: Prepare the pump and mattress. Disconnect the air hose, which is usually located on the side of the bed, from the pump. Then, unplug the pump from the power outlet. Clear any pillows or bedding from the mattress.
Step 2: Locate the air chambers. Sleep Number beds typically consist of two air chambers, one for each side of the bed. Find the access valves on the side of the mattress, which are usually covered with caps.
Step 3: Deflate the air chambers. Open the access valves and press down on the mattress to deflate the air. You may need to roll the mattress to help release the air more quickly.
Step 4: Roll up the sides of the mattress. Once the air chambers are deflated, roll up the sides of the mattress towards the center. Start with one side, then roll up the other side to meet it.
Step 5: Roll up the mattress from one end to the other. Starting from one end of the mattress, roll it up towards the other end. Use even pressure and smooth out any wrinkles as you go.
Step 6: Secure the rolled-up mattress. To secure the mattress and prevent it from unrolling, wrap it with strong straps or bungee cords. Alternatively, you can use heavy-duty garbage bags to cover the rolled-up mattress and tie them closed.
Recommended Strap Types Recommended Cord Sizes Cam buckles ¼-inch bungee cords Ratchet tie-downs ½-inch rope or straps Furniture straps ¾-inch webbing straps Disconnecting the Pump
To disconnect the pump from the sleep chamber, you’ll need to first remove the mattress covers and the air chamber cover, as described in the previous sections. Once the air chamber is exposed, you’ll see the pump connected to it by two hoses. To disconnect them, follow these detailed steps:
- Locate the hoses: Identify the two air hoses that connect the pump to the air chamber.
- Grip the hoses firmly: Grasp the hoses firmly, using gloves if necessary, to protect your hands from any potential air pressure.
- Disconnect the first hose: Apply gentle but firm pressure on the collar of the hose at the pump end. Pull the hose straight towards you to disconnect it.
- Disconnect the second hose: Repeat the same procedure for the second hose, disconnecting it from the pump.
- Secure the hoses: Once the hoses are disconnected, use zip ties or similar fasteners to secure them to prevent any air leakage during transport.
- Remove the platform: If the pump is mounted on a platform, use a hex wrench or socket wrench to loosen and remove the bolts that secure it.
- Unplug the pump: Unplug the power cord of the pump from the electrical outlet.
Packing and Storing the Components
8. Foam and Air Chambers
These components are the most fragile and require extra care when packing. To avoid damage, follow these steps:
- Carefully remove the air chambers from the base.
- Roll up the foam layers loosely, avoiding sharp folds.
- Place the rolled-up foam inside a clean, dry storage bag.
- Insert the air chambers into separate storage bags.
- Store the bags securely in a cool, dry place away from direct sunlight and moisture.
Here are some additional tips for packing and storing foam and air chambers:
Tip Explanation Use airtight storage bags. This prevents moisture and dust from damaging the foam. Keep foam layers rolled loosely. Tight rolling can damage the foam’s structure. Label storage bags. This helps identify the components when reassembling the bed. Reassembling the Bed (Optional)
Once you’ve disassembled your Sleep Number bed, you may need to reassemble it. The process is similar to disassembling, but in reverse.
To reassemble the bed:
- Insert the adjustable base legs into the corresponding holes in the base.
- Align the headboard with the adjustable base and attach it using the screws provided.
- Place the mattress topper on top of the adjustable base.
- Put the mattress on top of the topper.
- Tuck the fitted sheet around the mattress.
- Put on the flat sheet and blanket.
- Connect the pump to the adjustable base and inflate the mattress to your desired firmness.
- Enjoy your reassembled Sleep Number bed!
Step Action 1 Insert the adjustable base legs into the corresponding holes in the base. 2 Align the headboard with the adjustable base and attach it using the screws provided. 3 Place the mattress topper on top of the adjustable base. 4 Put the mattress on top of the topper. 5 Tuck the fitted sheet around the mattress. 6 Put on the flat sheet and blanket. 7 Connect the pump to the adjustable base and inflate the mattress to your desired firmness. 8 Enjoy your reassembled Sleep Number bed! Troubleshooting Common Issues
1. Mattress Won’t Inflate
- Check the air pump and make sure it’s properly connected to the mattress.
- Ensure the air hoses are not kinked or blocked.
- Inspect the mattress for any leaks. If you find a leak, contact Sleep Number for assistance.
2. Mattress Is Too Firm or Too Soft
- Adjust the firmness level using the remote control.
- If the mattress is still too firm, try releasing some air from the mattress using the air release valve located on the pump.
- If the mattress is too soft, add more air using the air fill valve on the pump.
3. Remote Control Not Working
- Replace the batteries in the remote control.
- Make sure the remote control is within range of the air pump.
- If the remote control still doesn’t work, contact Sleep Number for assistance.
4. Air Pump Making Noise
- Contact Sleep Number for assistance. The air pump may need to be repaired or replaced.
5. Mattress Sagging
- Inflate the mattress to the recommended firmness level.
- If the mattress is still sagging, contact Sleep Number for assistance.
6. Mattress Leaking Air
- Inspect the mattress for any visible leaks. If you find a leak, contact Sleep Number for assistance.
- Check the air hoses and connections for any loose or damaged parts.
7. Air Pump Overheating
- Unplug the air pump and let it cool down for at least 30 minutes.
- Contact Sleep Number for assistance if the air pump continues to overheat.
8. Mattress Not Holding Air
- Check the air hoses and connections for any loose or damaged parts.
- Contact Sleep Number for assistance if the mattress is still not holding air.
9. Mattress Too Bouncy
- Deflate the mattress partially and then re-inflate it to the recommended firmness level.
- If the mattress is still too bouncy, contact Sleep Number for assistance.
10. Troubleshooting Chart
Problem Possible Solution Mattress won’t inflate Check for disconnected pump, kinked air hoses, or leaks Mattress too firm or soft Adjust firmness using remote control or adjust air pressure using air release/fill valves Remote control not working Replace batteries, ensure it’s in range, or contact Sleep Number Air pump making noise Contact Sleep Number for assistance Mattress sagging Inflate to recommended firmness or contact Sleep Number Mattress leaking air Inspect for leaks or check air hoses and connections Air pump overheating Unplug and let cool down, then contact Sleep Number if it persists Mattress not holding air Check air hoses and connections or contact Sleep Number Mattress too bouncy Deflate and re-inflate to recommended firmness or contact Sleep Number How To Take Apart A Sleep Number Bed
If you are moving, need to make repairs, or simply want to clean your Sleep Number bed, you will need to know how to take it apart. The process is not difficult, but it does require some time and effort.
To start, you will need to disconnect the air hoses from the pump. Once the hoses are disconnected, you can lift the mattress off of the frame. The mattress is heavy, so it is best to get help from someone else.
Once the mattress is removed, you can take apart the frame. The frame is made up of several pieces, which are held together by bolts. You will need to use a wrench to loosen the bolts and separate the pieces.
Once the frame is disassembled, you can clean the individual pieces. You can use a mild soap and water solution to clean the fabric, and you can use a vacuum cleaner to clean the metal parts.
Once the pieces are clean, you can reassemble the frame. To do this, simply reverse the steps you took to disassemble it. Once the frame is reassembled, you can put the mattress back on top.
Finally, you will need to reconnect the air hoses to the pump. Once the hoses are connected, you can inflate the mattress and enjoy your bed.
People Also Ask About How To Take Apart A Sleep Number Bed
How do I disconnect the air hoses from the pump?
To disconnect the air hoses from the pump, simply pull the hose ends straight up and off of the pump nipples. It may take some force to pull the hoses off, but they should come off easily.
How do I lift the mattress off of the frame?
To lift the mattress off of the frame, get help from someone else. One person should stand at each end of the mattress, and lift it straight up and off of the frame.
How do I disassemble the frame?
To disassemble the frame, use a wrench to loosen the bolts that hold the pieces together. Once the bolts are loose, you can separate the pieces.
