Have you recently moved into a new home and need to change the Schlage door code for added security? Have you given someone temporary access to your home and now need to reset the code for your own peace of mind? Changing the Schlage door code is a quick and easy process that you can do yourself, without the need to call a locksmith. In this article, we’ll guide you through the steps to change your Schlage code in a few simple steps, ensuring the safety and security of your home.

Before you begin the code-changing process, ensure you have a Schlage lock with a keypad. Once confirmed, gather the necessary tools, which typically include a screwdriver and the Schlage programming tool that came with your lock. If you can’t locate the programming tool, you can usually obtain a replacement from the manufacturer or a hardware store. Next, locate the programming button on the interior side of your lock, usually situated behind the battery cover. With these items in hand, you’re ready to embark on the code-changing process.

To change the code on your Schlage lock, follow these steps:

1. Insert the programming tool into the programming button and press it for about 3 seconds until you hear a beep.

2. Enter the current user code, followed by the new user code you want to set.

3. Press the * button to save the new code.

Once you have completed these steps, your Schlage lock will be programmed with the new code. Test the new code to ensure it works properly before relying on it for access to your home. Changing the Schlage door code is a simple and straightforward process that can be completed in a matter of minutes, providing you with peace of mind and enhanced security for your home.

Removing the Back Plate

Before you can change the Schlage code, you’ll need to remove the back plate. Here’s a detailed guide on how to do it:

Materials You’ll Need:

Phillips head screwdriver

Instructions:

Remove the screws securing the back plate: The back plate is typically held in place by two to four screws. Locate these screws and use a Phillips head screwdriver to remove them.

Note: Some Schlage models may have hidden screws. If you can’t find any visible screws, check for a small hole or recess where a screwdriver can fit. Insert the screwdriver into the hole and turn it counterclockwise to loosen the screw.

2. **Gently pull the back plate away from the door:** Once the screws are removed, carefully pull the back plate away from the door. It should come off easily without too much force.
3. **Disconnect the wiring harness:** Once the back plate is removed, you will see a wiring harness connecting it to the lock assembly. Carefully disconnect the harness by pressing on the release tab or squeezing the sides of the connector.

Tips:

If the back plate is stuck, you can try using a thin tool, such as a putty knife or credit card, to gently pry it loose.
Be careful not to damage the wiring harness when disconnecting it.
If you encounter any difficulties, refer to the user manual for your specific Schlage model.

Locating the Programming Button

External Keypad

Locate the programming button on the exterior keypad of the lock. It is typically marked with the letter “P” or a symbol resembling a lock with a keyhole. The button is usually located near the bottom or side of the keypad.

Interior Keypad (For Locks With Both Internal and External Keypads)

If your lock has both an internal and external keypad, the programming button can be found on the interior keypad. Look for a small button or switch located near the top or bottom of the keypad. It may be labeled “Prog” or have a symbol representing a gear or wrench.

Hidden Programming Button

In some Schlage models, the programming button is concealed behind the faceplate of the lock. To access it:

Remove the faceplate by inserting a small flathead screwdriver into the slot at the bottom of the lock and gently prying it off.
Locate the programming button near the top of the lock mechanism.
Press and hold the programming button while replacing the faceplate.

The programming button is now accessible and can be used to change the lock’s code.

Entering Programming Mode

1. Press the Schlage Button

Locate the Schlage button on the interior side of the lock. It’s typically a small, black button with the Schlage logo. Press and release the button once.

2. Enter the Default Code

After pressing the Schlage button, enter the default code. The default code for Schlage locks is usually “1234” or “0000.” Enter the code using the keypad, pressing each number firmly.

3. Wait for the Confirmation Beeper

Once you’ve entered the default code, wait for the confirmation beeper. The lock will emit a series of beeps to indicate that you’ve successfully entered Programming Mode. The number of beeps varies depending on the lock model, but it’s typically between two and four.

Additional Information on Waiting for the Confirmation Beeper

If you don’t hear the confirmation beeper within 60 seconds of entering the default code, you may have triggered a lockout. To resolve this:

Remove the battery from the lock.
Wait for 10 seconds.
Reinstall the battery.
Repeat steps 1 and 2 above.

If you continue to experience issues, refer to the troubleshooting section of your lock’s user manual.

Changing the Master Code

The master code is the default code that comes pre-set on all Schlage locks. It’s important to change the master code as soon as possible after installing your lock, as it’s the code that all other users will use to access your home.

Step 1: Remove the battery cover

The battery cover is located on the back of the lock. Use a screwdriver to remove the screws that hold the cover in place, and then lift the cover off.

Step 2: Locate the programming button

The programming button is located on the inside of the battery cover. It’s a small, black button that’s usually labeled “Prog”.

Step 3: Press and hold the programming button

Press and hold the programming button for about 5 seconds. The lock will beep once, and the LED light will start to flash.

Step 4: Enter the new master code

Enter the new master code using the keypad. The LED light will stop flashing once you’ve entered the new code. The new master code will now be active.

Step	Action
1	Remove the battery cover
2	Locate the programming button
3	Press and hold the programming button for 5 seconds
4	Enter the new master code using the keypad

Changing the User Codes

To change the user codes on your Schlage lock, follow these steps:

Press the “Schlage” button on the keypad to wake up the lock.
Enter your master code and press the “#” key.
Press the “1” key to enter the programming mode.
Enter the user code you want to change and press the “*” key.
Enter the new user code and press the “#” key.
Press the “*” key again to confirm the change.
Repeat steps 4-6 for any other user codes you want to change.
Press the “Schlage” button to exit the programming mode.

Step 5: Enter the new user code and press the “#” key

The new user code you enter should be a 4-8 digit number. You can use any combination of numbers, but it is important to choose a code that is easy to remember but difficult for others to guess.

Example	Explanation
1234	This is a common and easy-to-guess code.
5789	This is a stronger code that is less likely to be guessed.
246810	This is a very strong code that is difficult to guess.

Once you have entered the new user code, press the “#” key to confirm the change.

Deleting Codes

To delete a code from your Schlage lock, follow these steps:

Enter your master code into the keypad.
Press the “Schlage” button.
Press the “4” key to access the user code management menu.
Enter the number of the code you want to delete.
Press the “Delete” key.
Press the “Enter” key to confirm the deletion.

Additional Notes on Deleting Codes

You can only delete user codes, not master codes.
If you delete a code that is currently in use, the user will no longer be able to access the lock.
It is recommended that you keep a record of all codes that you create and delete.

Code Type	Number of Codes	Code Length
Master Code	1	6-8 digits
User Code	30	4-8 digits

Adding Codes

To add a new code, follow these steps:

Enter the existing user code.
Press the “Program” button.
Press the “1” or “2” button to select the user you want to add a code for.
Enter a new 4-8 digit code.
Press the “Program” button again.
The new code will now be active.

Additional Notes on Adding Codes

You can add up to 30 user codes to your Schlage lock. Each user can have their own unique code.

When adding a new code, it is important to choose a code that is easy to remember but difficult for others to guess.

If you need to delete a code, you can do so by following the steps outlined in the “Deleting Codes” section below.

Number of Codes	Type of Code
1	Master Code
19	User Code
10	Temporary Code

Adjusting the Volume

The Schlage door lock comes with adjustable volume settings, allowing you to customize the volume of the keypad tones and alerts to your preference. Here’s a detailed guide on how to adjust the volume:

Enter your master code into the keypad to access the lock’s settings.
Press the “Settings” button (typically located on the keypad).
Navigate to the “Volume” option using the arrow buttons.
Press the “Select” button to enter the volume settings.
Select the desired volume level from the options provided (usually ranging from “Low” to “High”).
Press the “Select” button to confirm your selection.
Press the “Settings” button again to return to the main settings menu.
Press the “Lock” button to lock the keypad and save your changes.

Here’s a table summarizing the different volume levels and their corresponding options on the keypad:

Volume Level	Keypad Option
Low	1
Medium	2
High	3
Mute	0

How To Change Schlage Code

Resetting Your Code

If you’ve forgotten your code or need to reset it for any reason, here’s how:
1. Remove the battery cover on the back of the keypad.
2. Press and hold the reset button for 10 seconds.
3. Release the reset button and enter your new code (between 4 and 8 digits).
4. Press the “A” button to save your new code.

Adding or Deleting Users

To add or delete users, you’ll need the master code.
1. Enter the master code followed by the “+” button.
2. Enter the new user’s code followed by the “A” button.
3. To delete a user, enter the master code followed by the “-” button, then enter the user’s code.

Changing the Master Code

To change the master code, follow these steps:
1. Enter the existing master code followed by the “#” button.
2. Enter your new master code followed by the “A” button.

Troubleshooting Common Issues

1. The keypad is not responding

Check if the batteries are low or need to be replaced. You can also try resetting the keypad by pressing and holding the reset button for 10 seconds.

2. The code I entered is not working

Make sure you are entering the correct code. If you have forgotten your code, you can reset it by following the steps above.

3. The lock is not unlocking

Check if the door is properly aligned and if the deadbolt is not jammed. You can also try using the key to unlock the door manually.

4. The lock is not locking

Make sure the door is properly closed and that the deadbolt is extended. You can also try using the key to lock the door manually.

5. The keypad is beeping

The keypad may be beeping to indicate low batteries, an incorrect code, or a jammed door. Check the batteries, reset the keypad, or inspect the door for any obstructions.

6. The lock is not connecting to my smartphone

Make sure that your smartphone is compatible with the Schlage app and that you are using a strong Wi-Fi signal. You can also try resetting the lock by removing the batteries and reinserting them.

7. I’m having trouble with the Schlage app

Check if the app is up to date and that you have granted it all necessary permissions. You can also try uninstalling and reinstalling the app.

8. The lock is not working with my smart home system

Make sure that your lock is compatible with your smart home system and that you have followed the instructions for integration. You can also try resetting the lock by removing the batteries and reinserting them.

9. My lock was stolen or damaged

If your lock was stolen or damaged, you will need to contact Schlage customer support to report the incident and obtain a replacement. You may also need to update your smart home system to remove the stolen lock from your network.

Error Code	Description	Troubleshooting Steps
E1	Incorrect code	Enter the correct code or reset the keypad.
E2	Low batteries	Replace the batteries.
E3	Jammed door	Check the door for obstructions and ensure it is properly aligned.
E4	Communication error	Reset the lock by removing the batteries and reinserting them.
E5	System error	Contact Schlage customer support.

Lock Reset Procedure

To initiate the lock reset procedure, follow these steps:

Remove the battery cover on the inside of the lock.
Remove the 9-volt battery and wait 5-10 seconds.
Reinsert the 9-volt battery into the lock.
Close the battery cover.
Insert the emergency key into the keyhole on the outside of the lock.
Turn the emergency key to the unlock position and hold it there.
While holding the emergency key in the unlock position, press and release the “Reset” button on the inside of the lock.
Release the emergency key.
The lock will beep and the LED will flash, indicating that the reset was successful.
All user codes and settings will now be cleared from the lock.

To operate the lock manually, follow these steps:
Remove the battery cover on the inside of the lock. Disconnect the wire harness from the lock. Remove the lock from the door. Manually rotate the latchbolt to lock or unlock the door. Reinstall the lock on the door. Reconnect the wire harness to the lock. Replace the battery cover.