Activating the touch screen on your HP device is essential for navigating and interacting with your device. There are several methods you can use to activate the touch screen, depending on the model of your HP device. In this guide, we will provide clear instructions on how to activate the touch screen on different HP devices, ensuring seamless and efficient use of your device.
Before you begin, it is important to identify the model of your HP device. Different HP models may have slightly different methods of activating the touch screen. To check your device model, you can usually find it on the back or bottom of your device, or in the Settings menu. Once you have identified your device model, you can follow the corresponding instructions provided in the subsequent sections of this guide.
If you have an HP laptop or convertible device, the touch screen can typically be activated by simply touching it. However, some models may require an additional step. For example, on some HP 2-in-1 devices, you may need to press the F12 key or use a specific gesture to activate the touch screen. Consult your device’s user manual or search for specific instructions for your model online to ensure proper touch screen activation.
Enable Touchscreen in Device Manager
To enable the touchscreen on your HP device through Device Manager, follow these steps:
- Right-click on the “Start” button and select “Device Manager” from the menu.
- Expand the “Human Interface Devices” category. Here you should see a device named “HID-compliant touchscreen”.
- Right-click on the device and select “Enable” from the context menu. The touchscreen should now be up and running. If no Touchscreen device appears, proceed to the next step.
- Click on the “Scan for hardware changes” icon at the top of the Device Manager window. Windows will search for new hardware devices and install the necessary drivers.
- Check if the touchscreen device appears in the “Human Interface Devices” category. If it does, right-click on it and select “Enable”.
If you are still experiencing issues with the touchscreen, there may be other factors at play. Check if there are any available software updates for your device. Additionally, try restarting your device or performing a system restore to an earlier point in time when the touchscreen was working properly.
Reset BIOS Settings
If your HP laptop touchscreen is not working after trying the previous troubleshooting steps, you may need to reset the BIOS settings to factory defaults. This will erase any custom settings you have made, so be sure to back up any important data before proceeding.
Steps:
- Turn off your laptop and unplug it from the power outlet.
- Insert a paperclip or similar object into the reset hole on the back or bottom of the laptop. You should feel a small click when the hole is depressed.
- Hold down the reset button for about 5 seconds.
- Release the reset button and plug the laptop back into the power outlet.
- Turn on the laptop and access the BIOS setup menu.
- Reset BIOS to Defaults. Find the option to reset the BIOS settings to their default values. This option is usually located in the “Security” or “Exit” tab.
- Save changes. Press F10 to save the changes and exit the BIOS setup menu.
Perform a Hardware Diagnostics Test
If none of the above methods resolve the issue, you can perform a hardware diagnostics test to check for any underlying hardware problems.
Steps:
1. Turn off your HP device and disconnect all peripherals (e.g., mouse, keyboard).
2. Turn on the device and immediately press the “F2” key repeatedly until the HP PC Hardware Diagnostics UEFI menu appears.
3. Select “Component Tests.”
4. Choose “Touch Screen” from the list of available tests.
5. Follow the on-screen instructions to complete the test.
6. If the test fails, it indicates a hardware issue with the touch screen.
7. Contact HP support or visit an authorized HP service center for further assistance.
Additional Information:
The hardware diagnostics test may take several minutes to complete. Ensure that your device is connected to a stable power source during the test.
Possible Diagnostic Results | Explanation |
---|---|
Passed | The touch screen is functioning correctly. |
Failed | A hardware issue has been detected, and the touch screen needs to be repaired or replaced. |
How to Activate Touch Screen On Hp
If your HP touch screen is not working, there are a few things you can try to fix the issue.
- Restart your computer. This will often fix any minor software glitches that may be preventing your touch screen from working.
- Check the device manager. Make sure that the touch screen driver is installed and enabled. To do this, open the Device Manager and expand the “Human Interface Devices” section. The touch screen driver should be listed here. If it is not, or if it is disabled, right-click on it and select “Enable”.
- Update the touch screen driver. If the touch screen driver is out of date, it may not be able to function properly. To update the driver, visit the HP website and download the latest driver for your computer model.
- Calibrate the touch screen. If the touch screen is not responding accurately, you may need to calibrate it. To do this, open the Control Panel and select “Tablet PC Settings”. In the “Calibration” tab, click on the “Calibrate” button and follow the on-screen instructions.
- Contact HP support. If you have tried all of the above steps and your touch screen is still not working, you may need to contact HP support. They will be able to help you troubleshoot the issue and determine if your computer needs to be repaired.
People Also Ask About How to Activate Touch Screen On Hp
How do I turn on the touch screen on my HP laptop?
To turn on the touch screen on your HP laptop, you need to enable it in the BIOS. To do this, follow these steps:
- Restart your laptop and press the F10 key to enter the BIOS.
- Use the arrow keys to navigate to the “System Configuration” tab.
- Find the “Touch Screen” option and change it to “Enabled”.
- Press F10 to save your changes and exit the BIOS.
Why is my HP touch screen not working?
There are several reasons why your HP touch screen may not be working. Some of the most common causes include:
- The touch screen driver is not installed or is out of date.
- The touch screen is not calibrated properly.
- The touch screen is damaged.
- There is a problem with the hardware or software on your computer.