Do you want to change the code on your Schlage lock? Maybe you’ve lost your keys or you’re just looking to improve your home security. Whatever the reason, changing the code on your Schlage lock is a quick and easy process that can be done in just a few minutes.
First, you’ll need to gather your materials. You’ll need a Phillips head screwdriver, a new Schlage key, and the Schlage programming tool. If you don’t have a Schlage programming tool, you can purchase one online or at your local hardware store. Once you have your materials, you’re ready to begin.
Start by removing the two screws that hold the faceplate of the lock in place. Once the faceplate is removed, you’ll see the keypad and the lock mechanism. Insert the Schlage programming tool into the hole located on the bottom of the keypad. Press the programming button on the tool, and then enter the new code using the keypad. Once you’ve entered the new code, press the programming button again to save the changes. Now, your Schlage lock is reprogrammed with a new code.
Understanding the Lock’s Functionality
Schlage locks are renowned for their advanced security features and user-friendly design. To fully utilize the lock’s capabilities, it is essential to comprehend its core components and their roles in the locking mechanism.
Keypad
The keypad serves as the primary interface for user interaction. It consists of numerical buttons (typically 0-9) and may include additional function keys such as "Lock," "Unlock," and "Program." By entering a valid code, users can unlock the door or initiate programming procedures.
Deadbolt
The deadbolt is the physical barrier that secures the door. It extends from the lock’s interior into the door frame’s strike plate when locked, preventing the door from being opened from the outside.
Latch
The latch engages with the strike plate to hold the door shut when it is closed. Unlike the deadbolt, the latch does not provide additional security, but rather ensures a snug fit and prevents rattling.
Interior Lever or Knob
The interior lever or knob allows users to retract the latch and open the door from the inside.
Battery Compartment
The battery compartment houses the batteries that power the lock’s electronic components. It is typically located on the interior side of the lock.
Table: Schlage Lock Components
Component | Function |
---|---|
Keypad | User interface for code entry and programming |
Deadbolt | Primary security barrier |
Latch | Holds door closed |
Interior Lever or Knob | Opens door from inside |
Battery Compartment | Powers the lock’s electronics |
Gathering the Necessary Materials
Before you begin changing the Schlage lock code, gather the following essential materials:
Materials | Description |
---|---|
Schlage Lock | The lock you wish to change the code of |
Schlage Key (200, 200A, or 200B) | The key that corresponds to the lock |
Small Phillips-Head Screwdriver | For removing the faceplate of the lock |
Pen or Pencil | For pressing the programming button |
2. Locating the Programming Button
To change the code of your Schlage lock, you need to locate the programming button. This button is usually concealed beneath the faceplate of the lock. Follow these steps to find the programming button:
- Insert the Schlage key into the lock and turn it 90 degrees clockwise to unlock the door.
- Use the small Phillips-head screwdriver to remove the screws securing the faceplate to the lock body.
- Carefully remove the faceplate to expose the lock’s interior components.
- Locate the small, circular button labeled “Program” or “Prog.” It is typically situated near the top or bottom of the lock.
Navigating the Schlage Lock Menu
The Schlage Lock Menu provides a range of options for managing your lock’s settings. To navigate the menu:
- Press the Schlage button on the lock’s keypad.
- Enter the master code using the keypad.
- Use the up and down arrow buttons to scroll through the menu options.
- Press the Schlage button to select an option.
Accessing the User Codes Menu
To access the User Codes menu, follow these steps:
- In the Schlage Lock Menu, scroll down to “User Codes”.
- Press the Schlage button.
- Enter the master code using the keypad.
The User Codes menu allows you to view, add, delete, and change user codes. You can also assign each user code a specific permission level, such as “Always Open” or “Timed Access”.
Changing a User Code
To change a user code:
- In the User Codes menu, scroll down to the desired user code.
- Press the Schlage button.
- Enter your master code using the keypad.
- Enter the new user code using the keypad.
- Press the Schlage button to save the changes.
The new user code will now be active. Note that changing the master code will also change all user codes, so be sure to update any affected user codes accordingly.
Accessing the Programming Mode
To enter the programming mode and change the lock code on your Schlage lock, follow these steps:
- Remove the battery cover on the back of the lock.
- Locate the small black button inside the battery compartment.
- Press and hold the button for 5 seconds. The lock will beep, indicating that it has entered the programming mode.
- Within 30 seconds, press the desired user code (1 to 30 digits long) and then press the # key.
User Code Range | Button to Press |
---|---|
1 – 19 | 1 |
20 – 38 | 2 |
39 – 57 | 3 |
For example, if you want to set the user code to 1234, press the following sequence of buttons: 1, 2, 3, 4, #.
The lock will beep again to confirm that the new code has been saved. You can now release the black button, replace the battery cover, and test the new code by entering it on the keypad.
Entering the Current User Code
1. Ensure that the keypad is clean and free of any debris. Use a soft cloth or brush to clean it if necessary.
2. Enter the 6-digit Program Code that was given to you when you purchased the lock. If you do not have the Program Code, please contact Schlage Customer Support.
3. Follow these button sequences:
**For older Schlage models (manufactured before 2021):**
- Press the “#” key.
- Enter the 6-digit Programming Code.
- Press the “#” key again.
- Enter the current user code that you wish to change.
- Press the “#” key one final time.
**For newer Schlage models (manufactured after 2021):**
Press the “Schlage” button on the keypad.
Current Device Setting | Corresponding Button |
---|---|
Programming Mode | “1” |
Program Code Entry | “2” |
User Code Entry | “3” |
Electronic Lock Reset | “4” |
Creating a New User Code
Step 1: Access Programming Mode
- Ensure the lock is unlocked and the door is closed.
- Locate the "Program" button on the interior side of the lock.
- Press and hold the "Program" button for 3 seconds until the keypad beeps and the LED light flashes green.
Step 2: Add a New User
- Within 30 seconds of entering programming mode, press the number "1" on the keypad.
- The LED light will flash green and red to indicate that a new user code can be entered.
Step 3: Enter a New Code
- Enter your desired 6-digit user code using the keypad.
- The LED light will flash green again to confirm that the code has been saved.
Step 4: Toggle User Rights
- To enable or disable the user code for access, press the "Unlock" or "Lock" button on the keypad.
- If you press "Unlock," the user will have access to unlock the door.
- If you press "Lock," the user will only be able to lock the door.
Step 5: Repeat for Additional Codes
- To create additional user codes, repeat steps 2-4 up to a maximum of 30 user codes.
Step 6: Exiting Programming Mode
- To exit programming mode, simply close the door or press the "Program" button again.
- The LED light will turn solid green to indicate that programming mode is complete.
Button | Action |
---|---|
"1" | Add a new user |
"Unlock" | Enables access for the user |
"Lock" | Disables access for the user |
"Program" | Exits programming mode |
Confirming the Code Change
Once you have entered the new code, the lock will automatically save it. To confirm the change, simply enter the new code again. If the lock unlocks, you know that the code has been successfully changed.
Here’s a step-by-step guide for confirming the code change:
- Enter the new code into the keypad.
- If the lock unlocks, the code has been successfully changed.
- If the lock does not unlock, re-enter the new code and try again.
- If the lock still does not unlock, contact Schlage customer support.
Here’s a table summarizing the steps for confirming the code change:
Step | Action |
---|---|
1 | Enter the new code into the keypad. |
2 | Check if the lock unlocks. |
3 | If the lock unlocks, the code has been successfully changed. |
4 | If the lock does not unlock, re-enter the new code and try again. |
5 | If the lock still does not unlock, contact Schlage customer support. |
Troubleshooting Common Issues
1. Code Not Working
Ensure the code you’re using is correct. If you’ve changed it recently, check again that you followed the steps correctly. Additionally, the keypad may be locked out due to incorrect code entries multiple times. Wait for 2-5 minutes before trying again.
2. Lock Won’t Lock
Check if the door is fully closed, as the latch won’t engage if the door is ajar. Inspect the latch for any obstructions and clean it if necessary. Also, verify that the batteries have sufficient power.
3. Lock Won’t Unlock
Confirm that you’re using the correct code. If the keypad is jammed, try using a key to unlock. Ensure the batteries are not completely drained and are replaced when needed.
4. Deadbolt Won’t Extend
Check if the door is properly aligned and not binding on the frame. Inspect the deadbolt mechanism for any obstructions or debris and clean it if required. If it still doesn’t extend, contact a locksmith.
5. Handle Won’t Turn
Ensure the handle is properly installed and aligned. Inspect the latch for any obstructions or damage. If you’re using a key, verify that it’s properly cut and not worn.
6. Keypad Not Responding
Check the batteries and replace them if necessary. Clean the keypad contacts with a cotton swab and rubbing alcohol to remove any dirt or moisture. If it’s still not responding, reset the lock to factory settings.
7. Auto-Lock Not Working
Ensure the auto-lock feature is enabled in the lock’s settings. Verify that the batteries are adequately powered and that the door is properly closed when enabling auto-lock.
8. Keypad Display Issues
If the keypad displays “Low Battery,” replace the batteries immediately. If the display shows “Code Error,” verify that the code you’re entering is correct. For other display issues, such as pixelation or lines, contact Schlage customer support.
Resetting the Lock to Factory Settings
If you’ve lost the lock code or suspect it may have been compromised, you can reset your Schlage lock to factory settings. This will erase all user codes, including the master code, and restore the lock to its original configuration.
To reset the lock to factory settings:
- Remove the battery cover from the inside of the lock.
- Locate the “Reset” button inside the battery compartment.
- Using a small tool like a paperclip, press and hold the “Reset” button for 10 seconds.
- The lock will beep and the LED will flash red three times to indicate that it has been reset.
- Reinstall the battery cover.
Once the lock has been reset, you can program a new master code by following the steps in the “Programming a New Master Code” section below.
Enhancing Security with Additional Codes
In addition to the primary code, you can create up to 19 additional codes that can grant access to the lock. These codes can be assigned to family members, friends, or service providers, providing convenient access without compromising security. Assigning different codes to various users allows you to easily revoke access in case a code is compromised.
Here are some tips for using additional codes effectively:
- Choose codes that are easy to remember for authorized users while avoiding predictable patterns.
- Avoid using the same code for multiple users.
- Create separate codes for regular use and emergency situations.
- Consider having one temporary code for one-time access, such as for a house cleaner or delivery driver.
- Keep a record of assigned codes and their corresponding users for easy reference.
- Revoke unused or unauthorized codes promptly.
- Use a different code for each door or area that requires access control.
- Change codes regularly, especially if you suspect a breach.
- Assign specific time windows for code usage, such as during business hours or after school.
- Consider using a smart lock that allows you to remotely manage codes and track access history.
Code Type | Purpose |
---|---|
Primary Code | Master code for the lock, used to change settings and add/remove codes. |
Additional Codes | Up to 19 codes that can be assigned to different users. |
Temporary Code | One-time access code for specific individuals or situations. |
Emergency Code | Unique code for use in emergency situations. |
Time-Restricted Code | Code that only works during specified time windows. |
How To Change Schlage Lock Code
To change the code on a Schlage lock, you will need to follow these steps:
- Remove the battery cover on the inside of the lock.
- Locate the reset button on the inside of the lock.
- Press and hold the reset button for 10 seconds.
- Release the reset button and enter the new code.
- Press and hold the lock button for 3 seconds.
- The new code will now be programmed into the lock.
It is important to note that changing the code on a Schlage lock will erase any existing codes.
People Also Ask
How do I reset my Schlage lock to factory settings?
To reset your Schlage lock to factory settings, you will need to follow these steps:
- Remove the battery cover on the inside of the lock.
- Locate the reset button on the inside of the lock.
- Press and hold the reset button for 10 seconds.
- The lock will now be reset to factory settings.
Can I change the code on my Schlage lock without removing the battery?
No, you cannot change the code on your Schlage lock without removing the battery.