3 Simple Steps to Reset Your Genie Garage Door Opener

…

If you’re having trouble with your Genie garage door opener, one of the first things you should try is resetting it. This will clear any stored memory and return the opener to its factory default settings. So if you’ve lost the remote, changed your mind about the security code, or just want to start fresh, follow these simple steps reset your Genie garage door opener.

First, locate the reset button on your garage door opener. It’s usually a small, red button located on the back or side of the unit. Once you’ve found the reset button, press and hold it for about 10 seconds. The opener will beep and the lights will flash, indicating that it has been reset. Now, you can reprogram the opener with your desired settings.

If you’re still having trouble with your Genie garage door opener, you can try contacting Genie customer support. They can help you troubleshoot the problem and get your opener working again. You can also find helpful troubleshooting tips and videos on the Genie website.

Reset the Safety Sensors

The safety sensors are two small, black devices that are mounted near the bottom of the garage door tracks. They emit an invisible beam of light that, when broken, causes the door to automatically reverse. If the sensors are misaligned or dirty, they can cause the door to stop working properly.

To reset the safety sensors, follow these steps:

1. Locate the two safety sensors. They are usually mounted on either side of the garage door, about six inches above the floor.
2. Unplug the garage door opener from the power outlet.
3. Disconnect the wires from the back of each sensor.
4. Clean the lenses of the sensors with a soft cloth.
5. Realign the sensors so that they are facing each other directly.
6. Detailed Instructions for Aligning the Sensors:
   • Place a small piece of cardboard or a wooden shim between the sensor and the mounting bracket.
   • Slowly move the sensor until the LED light on the sensor turns from red to green.
   • Tighten the mounting screws to secure the sensor in place.

   7. Reconnect the wires to the back of each sensor.
   8. Plug the garage door opener back into the power outlet.
   9. Test the sensors by waving your hand in front of them. The door should reverse automatically.

   Maintaining Your Genie Garage Door Opener

   To ensure the optimal performance and longevity of your Genie garage door opener, regular maintenance is crucial. Here are some essential maintenance tasks to keep your opener running smoothly.

   Weekly Inspection

   Every week, visually inspect your garage door and opener for any signs of damage, loose hardware, or debris. Tighten any loose screws or bolts, and remove any obstructions that may impede the door’s movement.

   Monthly Maintenance

   Once a month, clean the sensors located at the bottom of the door and on the wall-mounted unit. Use a soft, damp cloth to wipe away any dirt or debris. Also, check the batteries in the remote controls and replace them if necessary.

   Quarterly Lubrication

   Every three months, lubricate the following components:

   Component
   Door hinges
   Chain or belt drive
   Trolley wheels
   Springs (if applicable)
   Motor

   For lubrication, use a light silicone-based lubricant or the manufacturer’s recommended lubricant.

   Annual Inspection

   Once a year, have a qualified technician inspect your garage door opener. They will perform a comprehensive inspection and make any necessary adjustments or repairs to ensure the opener is in optimal condition.

   How to Reset Your Genie Garage Door Opener

   If your Genie garage door opener is not working properly, you may need to reset it. Here are the steps on how to reset your Genie garage door opener:

   1. Unplug the garage door opener from the power outlet.
   2. Wait 30 seconds.
   3. Plug the garage door opener back into the power outlet.
   4. Press and hold the “Reset” button on the garage door opener for 5 seconds.
   5. Release the “Reset” button.
   6. The garage door opener will now be reset.

   Note: If you do not see a “Reset” button on your garage door opener, you may need to consult the user manual for specific instructions on how to reset your model.

   People Also Ask About How to Reset Your Genie Garage Door Opener

   What are some of the symptoms of a garage door opener that needs to be reset?

   Some of the symptoms of a garage door opener that needs to be reset include:

   • The garage door does not open or close properly.
   • The garage door opener remote does not work.
   • The garage door opener keypad does not work.
   • The garage door opener lights are flashing.
   • The garage door opener is making a strange noise.

   How often should I reset my garage door opener?

   You should only need to reset your garage door opener if it is not working properly.

   Can I reset my garage door opener myself?

   Yes, you can reset your garage door opener yourself by following the steps outlined above.