Embark on a do-it-yourself adventure with this comprehensive guide to dismantling your Xbox One S. Whether you’re facing a minor repair or seeking a deeper understanding of the console’s inner workings, this step-by-step tutorial will empower you with the knowledge and confidence to disassemble your Xbox One S with ease. By following our meticulously detailed instructions, you’ll navigate the intricate components and carefully extract them, leaving no screw unturned and no mystery unsolved.
Before embarking on this disassembly, it’s imperative to gather the necessary tools and create a workspace conducive to precision work. Ensure you have access to a set of screwdrivers, including T8, T10, and T15 sizes. Additionally, a plastic spudger or opening tool will prove invaluable for gently prying and separating components without causing damage. As you proceed through the disassembly process, meticulous organization is key. Keep track of screws and small parts, meticulously labeling them to avoid any mix-ups during reassembly.
As you venture deeper into the console’s recesses, you’ll uncover a myriad of components. Be prepared to encounter the power supply, motherboard, CPU, GPU, hard drive, and optical drive. Disconnect cables with precision, taking note of their original positions to facilitate seamless reassembly. Throughout the disassembly, handle components with care, avoiding potential damage caused by static discharge. With each successful step, your understanding of the Xbox One S’s intricate design will deepen, empowering you with the knowledge to resolve any issues that may arise in the future.
Identifying the Necessary Tools
Before embarking on your Xbox One S disassembly, it’s crucial to gather the appropriate tools. These tools will help you dismantle and reassemble the console safely and efficiently. Here’s the list of essential tools you’ll need:
| Tool | Purpose |
|---|---|
| Phillips #0 Screwdriver | Removing and tightening screws throughout the console |
| T8 Torx Screwdriver | Loosening the screws securing the bottom panel |
| T9 Torx Screwdriver | Removing the screws holding the disc drive in place |
| Plastic Pry Tools | Gently separating and prying open various components |
| Tweezers | Handling small parts, such as screws and connectors |
| Anti-Static Wrist Strap | Preventing electrostatic discharge that can damage components |
In addition to these tools, it’s recommended to have a well-lit workspace, a clean surface, and a magnetic tray to keep track of small parts. Gather these tools before starting the disassembly process to avoid any interruptions or delays.
Powering Down and Unplugging the Device
Safely Powering Down Your Xbox One S
Before you begin to disassemble your Xbox One S, it’s crucial to power it down correctly. To do this:
1. Press the Xbox button on the console or controller to open the Guide.
2. Select “Settings” from the menu.
3. Navigate to “General” and then “Power mode & startup.”
4. Choose “Shut down console” and confirm your selection.
Once the console is completely powered down, you can proceed to unplug it from the power outlet.
Unplugging the Console and Peripherals
1. Locate the power cable connected to the back of the Xbox One S.
2. Firmly grasp the plug and gently pull it straight out of the power outlet.
3. Disconnect any peripherals connected to the console, including controllers, headsets, and external storage devices.
Tips for Safe Unplugging
| Tip | Description |
|---|---|
| Avoid pulling on the cable | This can damage the cable or the port on the console. |
| Use your fingers or a tool | If it’s difficult to remove the plug by hand, use a small tool like a flathead screwdriver to gently pry it out. |
| Ensure all connections are firm | Before plugging the console back in, make sure all cords are securely connected. |
Removing the Top Cover
To remove the top cover of your Xbox One S, you will need a Torx T8 screwdriver. Here are the steps:
- Locate the two black screws on the back of the console, near the bottom. These screws are covered by rubber feet, which you can remove with your fingers.
- Remove the two screws.
- Lift the top cover up and off the console. The cover is held in place by clips, so it may require some force to remove it.
Removing the Rubber Feet
The rubber feet on the bottom of the Xbox One S are held in place by adhesive. To remove them, you can use a pair of tweezers or a flathead screwdriver.
If you are using tweezers, simply grab the edge of the rubber foot and pull it up. If you are using a flathead screwdriver, insert the screwdriver under the edge of the rubber foot and pry it up.
Removing the Screws
The screws that hold the top cover in place are Torx T8 screws. To remove them, you will need a Torx T8 screwdriver.
Insert the screwdriver into the head of the screw and turn it counterclockwise to loosen the screw. Once the screw is loose, you can remove it by hand.
| Step | Action |
|---|---|
| 1 | Locate the two black screws on the back of the console, near the bottom. |
| 2 | Remove the two screws. |
| 3 | Lift the top cover up and off the console. |
Disconnecting Internal Components
Once the top cover is removed, you can begin disconnecting the internal components. Here’s a step-by-step guide:
1. Disconnect the Power Supply
Locate the power supply unit at the back of the console. Gently pull the power supply connector from the motherboard.
2. Disconnect the Optical Drive
Pull the optical drive ribbon cable from the motherboard. Next, remove the two screws securing the optical drive to the chassis. Then, carefully lift the optical drive out of the console.
3. Unplug the Bluetooth and Wi-Fi Module
Locate the Bluetooth and Wi-Fi module on the motherboard. Carefully unplug the module’s ribbon cable.
4. Detach the Fan and Heatsink Assembly
The fan and heatsink assembly must be carefully detached. It consists of the following components:
| Component | Description |
|---|---|
| Fan | Cools the console while running |
| Heatsink | Dissipates heat away from the processor and other components |
| Two screws | Secure the heatsink to the chassis |
| Thermal paste | Conducts heat from the processor to the heatsink |
To remove the fan and heatsink assembly, follow these steps:
- Locate the two screws that secure the heatsink to the chassis.
- Using a screwdriver, remove the screws.
- Carefully lift the heatsink straight up to detach it from the console.
- Inspect the thermal paste and clean any excess before reassembly.
- Detach the fan from the heatsink by disconnecting its power connector.
Removing the Power Supply Unit
Step 1: Unplug the console. Ensure the Xbox One S is not connected to any power source before proceeding.
Step 2: Remove the bottom panel. Flip the console upside down and locate the plastic panel covering the bottom. Push down on the tabs on the sides and slide the panel towards the front of the console to remove it.
Step 3: Disconnect the power supply unit harness. Inside the console, find the black cable harness connecting the power supply unit to the motherboard. Gently pull the harness connector straight up to disconnect it.
Step 4: Remove the power supply unit screws. There are four screws securing the power supply unit to the chassis. Remove these screws using a T10 Torx screwdriver.
Step 5: Lift and remove the power supply unit. Carefully lift the power supply unit up and out of the chassis. It may be necessary to wiggle it slightly to free it from any clips or tabs securing it in place.
| Component | Description |
|---|---|
| Power supply unit harness | Connects the power supply unit to the motherboard |
| T10 Torx screwdriver | Required for removing the power supply unit screws |
Separating the Controller Ports
Once you have removed the top panel, you will need to separate the controller ports from the main body of the console. To do this, you will need to use a Philips #00 screwdriver to remove the four screws that are holding the controller ports in place.
Once the screws have been removed, you can carefully lift the controller ports up and away from the main body of the console. Be careful not to damage the ribbon cable that is connecting the controller ports to the motherboard.
With the controller ports removed, you will now have access to the motherboard and other internal components of the console.
Here is a more detailed step-by-step guide to separating the controller ports:
- Remove the top panel of the console.
- Locate the four screws that are holding the controller ports in place.
- Use a Philips #00 screwdriver to remove the screws.
- Carefully lift the controller ports up and away from the main body of the console.
- Be careful not to damage the ribbon cable that is connecting the controller ports to the motherboard.
Once you have separated the controller ports, you can proceed to the next step of disassembling the console.
Reassembling the Xbox One S
Once you have cleaned and inspected all of the components, it is time to reassemble the Xbox One S. Start by placing the motherboard back into the chassis. Make sure that the connectors are properly aligned and that the screws are tightened securely. Next, attach the power supply to the motherboard and secure it with screws. Connect the HDMI port to the motherboard and secure it with a screw. Attach the optical drive to the motherboard and secure it with screws. Connect the hard drive to the motherboard and secure it with screws. Connect the wireless card to the motherboard and secure it with screws. Place the top cover on the Xbox One S and secure it with screws. Connect the power cord and HDMI cable to the Xbox One S and turn it on to test it.
10. Connect the front panel and buttons
The front panel is the last piece to be installed. It snaps into place over the top and sides of the Xbox One S. Make sure that the front panel is properly aligned before snapping it into place. Once the front panel is in place, you can attach the buttons. The buttons are held in place by clips. To attach a button, simply push it into place until it snaps into the clip. Once all of the buttons are attached, you have successfully reassembled the Xbox One S. Congratulations!
Additional tips
Here are a few additional tips for reassembling the Xbox One S:
- Be careful not to overtighten the screws.
- Make sure that all of the connectors are properly aligned before connecting them.
- If you are having any difficulty reassembling the Xbox One S, refer to the official Xbox One S service manual.
| Component | Screws |
|---|---|
| Motherboard | 4 |
| Power supply | 4 |
| HDMI port | 1 |
| Optical drive | 4 |
| Hard drive | 4 |
| Wireless card | 2 |
| Top cover | 5 |
| Front panel | Snaps into place |
| Buttons | Clips |
How To Take Apart Xbox One S
To take apart an Xbox One S, you will need the following tools:
- A Phillips #00 screwdriver
- A T8 Torx screwdriver
- A plastic spudger
- A pair of tweezers
Once you have gathered your tools, follow these steps:
- Unplug the Xbox One S from the power outlet and remove all cables.
- Place the Xbox One S upside down on a flat surface.
- Use the T8 Torx screwdriver to remove the eight screws that secure the bottom cover of the Xbox One S.
- Use the plastic spudger to gently pry the bottom cover off of the Xbox One S.
- Use the Phillips #00 screwdriver to remove the two screws that secure the optical drive.
- Disconnect the power cable from the optical drive.
- Use the plastic spudger to gently pry the optical drive out of the Xbox One S.
- Use the Phillips #00 screwdriver to remove the four screws that secure the motherboard.
- Disconnect the ribbon cables from the motherboard.
- Carefully lift the motherboard out of the Xbox One S.
- Use the tweezers to remove the thermal paste from the CPU and GPU.
- Use the plastic spudger to gently pry the heat sink off of the CPU and GPU.
- Replace the thermal paste on the CPU and GPU.
- Reattach the heat sink to the CPU and GPU.
- Reinsert the motherboard into the Xbox One S.
- Reconnect the ribbon cables to the motherboard.
- Reinsert the optical drive into the Xbox One S.
- Reconnect the power cable to the optical drive.
- Replace the two screws that secure the optical drive.
- Replace the bottom cover of the Xbox One S.
- Replace the eight screws that secure the bottom cover.
- Plug the Xbox One S back into the power outlet and reconnect all cables.
People Also Ask About How To Take Apart Xbox One S
How do I open an Xbox One S without breaking it?
To open an Xbox One S without breaking it, you will need to follow the steps outlined above carefully. Be sure to use the correct tools and be gentle when prying the components apart.
What are the most common problems with Xbox One S?
The most common problems with Xbox One S include overheating, disc drive issues, and controller problems.
How can I prevent my Xbox One S from overheating?
To prevent your Xbox One S from overheating, you should make sure that it is well-ventilated and that the vents are not blocked. You should also avoid placing the Xbox One S in enclosed spaces or near heat sources.
