Featured Image:
Are you ready to embark on a journey of ergonomic bliss? The Logitech Ergo K860 is a keyboard designed to redefine your typing experience. However, before you can revel in its ergonomic glory, you must master the art of removing its keys. Fear not, dear reader, for this comprehensive guide will lead you through the process seamlessly. In this first paragraph, we’ll shed light on the importance of key removal and introduce the essential tools you’ll need for the task.
Transition: Now that you’re equipped with the knowledge and tools, let’s delve into the step-by-step guide to removing the keys of your Logitech Ergo K860 keyboard. This process is relatively simple and requires minimal effort. We’ll guide you through each step with clarity and precision, ensuring you can undertake this task with confidence. As you follow these instructions, you’ll discover the ease and efficiency with which you can personalize and maintain your Logitech Ergo keyboard.
Transition: Once you’ve successfully removed the keys, you’ll have the opportunity to explore the inner workings of your keyboard. Whether you’re planning to clean it, replace worn-out keys, or simply customize its layout, the ability to remove and replace the keys provides you with unparalleled flexibility. The Logitech Ergo K860 is designed with the user in mind, empowering you to tailor it to your specific needs and preferences. So, let’s dive right into the process and unlock the full potential of your ergonomic keyboard.
Detach the Palm Rest
Gently lift the palm rest from the body of the keyboard: Hold the keyboard firmly with one hand and gently lift the palm rest with the other hand. Be cautious not to use too much force as this may damage the keyboard.
Find the two small release tabs on the underside of the palm rest: These tabs are located near the front of the palm rest. Use a small tool, such as a toothpick or paperclip, to push down on the tabs.
Slide the palm rest forward off of the keyboard: Once you have pushed down on the release tabs, you should be able to slide the palm rest forward and off of the keyboard. Be careful not to drop the palm rest.
To reattach the palm rest, simply align it with the keyboard and slide it back into place until you hear a click.
Remove the Screws
Locate the four screws under the palm rest of the keyboard. These screws hold the top plate in place.
Use a hex key or Phillips screwdriver to remove the screws gently.
| Screw Size | Tool Required |
|---|---|
| M3 x 6mm | Hex key (1.5mm) or Phillips screwdriver (PH1) |
Once the screws are removed, carefully lift the top plate up and away from the keyboard. Keep track of the screws and ensure they are not lost.
Tip: Be careful not to damage the wire that connects the top plate to the keyboard’s circuit board.
3. Separate the Top and Bottom Shells
With the screws removed, you can now separate the top and bottom shells of the keyboard. To do this, carefully insert a thin plastic pry tool or spudger into the seam between the two halves and gently pry them apart. Start at the top of the keyboard and work your way around the edges, taking care not to damage the plastic.
Once you have separated the top and bottom shells, you will see the internal components of the keyboard, including the printed circuit board (PCB), membrane switch assembly, and keycaps. Be careful not to touch the PCB or any of its components, as this could damage the keyboard.
To remove a keycap, simply pull it straight up from the keyboard. The keycaps are held in place by small plastic clips that fit into grooves on the PCB. To reattach a keycap, simply align it with the corresponding groove on the PCB and press down until it snaps into place.
Additional Tips for Separating the Top and Bottom Shells
| Tip |
|---|
| Use a thin plastic pry tool or spudger to avoid damaging the plastic. |
| Start at the top of the keyboard and work your way around the edges. |
| Be careful not to touch the PCB or any of its components. |
Locate the Key Switch
The key switch is a small, rectangular white plastic piece that is located beneath each keycap. To locate the key switch, simply remove the keycap by gently pulling it up with your fingers.
Identify the Key Switch Type
There are two types of key switches used in the Logitech Ergo K860 keyboard: Kailh Choc V1 and Cherry MX Red. The Kailh Choc V1 switches are brown in color and have a tactile bump, while the Cherry MX Red switches are red in color and have a linear feel.
Use the Key Switch Puller
Once you have identified the key switch type, you can use the key switch puller to remove the key switch. The key switch puller is a small, plastic tool that is included with the keyboard.
Steps to Remove the Key Switch Using the Key Switch Puller:
1. Insert the key switch puller into the opening on the top of the key switch.
2. Gently press down on the key switch puller until the key switch pops out of its socket.
3. Remove the key switch from the key switch puller.
Unclip the Key Switch
To unclip the key switch, you’ll need to carefully pry up the keycap with a plastic spudger or a flat-head screwdriver. Once the keycap is removed, you’ll see a small metal clip holding the key switch in place. Use a pair of tweezers to gently lift the clip and remove the key switch.
Here’s a step-by-step guide to unclipping the key switch:
- Locate the key switch that you want to remove.
- Pry up the keycap using a plastic spudger or a flat-head screwdriver. Be careful not to damage the keycap.
- Once the keycap is removed, you’ll see a small metal clip holding the key switch in place.
- Use a pair of tweezers to gently lift the clip.
- Once the clip is released, lift the key switch out of the keyboard.
Lift the Keycap Off
To remove a keycap from your Logitech Ergo keyboard, you’ll need to first lift it off the switch. Here’s how to do it:
1. Locate the Keycap Removal Tool
On the back of your keyboard, you’ll find a small, plastic keycap removal tool. This tool is used to safely remove keycaps without damaging them.
2. Position the Keycap Removal Tool
Insert the keycap removal tool into the small gap between the keycap and the switch. The tool should be positioned so that its prongs are touching the sides of the keycap.
3. Gently Pry the Keycap Up
Using gentle, even pressure, pry the keycap up from the switch. Do not use excessive force, as this can damage the keycap or the switch.
4. Lift the Keycap Off
Once the keycap is loose, lift it straight up and off the switch.
5. Inspect the Switch
Before replacing the keycap, inspect the switch for any damage. If the switch is damaged, you may need to replace it.
6. Replace the Keycap
To replace the keycap, simply align it with the switch and press down until it clicks into place. Make sure that the keycap is fully seated on the switch.
| Step | Action |
|---|---|
| 1 | Locate the keycap removal tool. |
| 2 | Position the keycap removal tool. |
| 3 | Gently pry the keycap up. |
| 4 | Lift the keycap off. |
| 5 | Inspect the switch. |
| 6 | Replace the keycap. |
Reassemble the Keyboard
To reassemble the keyboard, follow these steps:
1. Align the top and bottom halves of the keyboard.
2. Press down on the center of the keyboard to snap the two halves together.
3. Flip the keyboard over.
4. Insert the two screws into the holes on the bottom of the keyboard.
5. Tighten the screws until they are snug.
6. Turn the keyboard back over.
7. Insert the keys into the keyboard.
To do this, gently press down on the center of the key until it snaps into place. You may need to use a little force to insert the keys, but be careful not to break them. If a key is not fitting properly, try rotating it slightly before pressing down.
Here is a table of the key positions:
| Row | Keys |
|---|---|
| 1 | Escape, F1, F2, F3, F4 |
| 2 | F5, F6, F7, F8, F9 |
| 3 | F10, F11, F12, Print Screen, Scroll Lock |
| 4 | Pause/Break, Insert, Home, Page Up, Delete |
| 5 | End, Page Down, Num Lock, /, * |
| 6 | -, 7, 8, 9, + |
| 7 | 4, 5, 6, &, 1 |
| 8 | 2, 3, 0, Enter, . |
| 9 | Spacebar |
8. Connect the keyboard to your computer.
Troubleshooting Removal Issues
If you’re having trouble removing a key from your Logitech Ergo, there are a few things you can try.
Check for Hidden Clips
Some keys have hidden clips that need to be released before the key can be removed. Look for small tabs or indentations around the edges of the key and gently pry them up with a flat-head screwdriver or your fingernail.
Use a Keycap Puller
If you’re having trouble removing a key with your fingers, you can use a keycap puller. This is a small tool that fits over the key and provides leverage to pull it off.
Remove Stabilizer Inserts
Some larger keys, such as the spacebar, have stabilizer inserts that need to be removed before the key can be taken off. Use a pair of tweezers or a flat-head screwdriver to gently lift the stabilizer inserts out of the key.
Gently Rock the Key
Once you’ve released any hidden clips or stabilizer inserts, gently rock the key back and forth while pulling up. This will help to loosen the key and make it easier to remove.
Apply Even Pressure
When pulling up on the key, apply even pressure across the entire surface. This will help to prevent the key from bending or breaking.
Use a Paper Towel for Grip
If you’re having trouble getting a good grip on the key, wrap a small piece of paper towel around it. This will provide extra friction and make it easier to pull off.
Be Patient
Removing keys from a keyboard can take some time and patience. Don’t force the key if it’s not coming off easily. Take your time and try different methods until you’re able to remove it successfully.
Additional Tips
Here are some additional tips for removing keys from a Logitech Ergo keyboard:
- If you’re having trouble removing a key, don’t be afraid to ask for help from Logitech customer support.
- If you’re not sure how to remove a key, refer to the Logitech Ergo user manual.
- Be careful not to damage the key or the keyboard while removing it.
Alternative Removal Methods
If the key puller tool doesn’t work or isn’t available, try these alternative methods:
Using a Staple Remover
Gently insert the prongs of a staple remover under the edge of the keycap. Apply upward pressure to pry the keycap off the switch.
Using a Screwdriver
Insert a small, flat-head screwdriver under the edge of the keycap. Carefully pry up the keycap while avoiding damaging the switch or keycap.
Using a Knife
Use a sharp knife to gently slide under the edge of the keycap. Apply slight upward pressure to dislodge the keycap.
Using Tweezers
If the keycap is small, try using tweezers to grip the edges and pull it off the switch.
Using a Vacuum Cleaner
Connect a small hose attachment to a vacuum cleaner. Position the hose over the keycap and gently suction the keycap off the switch.
Using Fishing Line
Tie a loop of fishing line around the keycap. Pull the line taut to create tension, then gently lift the keycap off the switch.
Using Dental Floss
Thread dental floss under the edge of the keycap. Pull the floss back and forth to saw through the plastic tabs holding the keycap in place.
Using a Paperclip
Straighten out a paperclip and bend one end into a hook. Hook the paperclip under the edge of the keycap and gently pull it up to remove the keycap.
Using a Spudger
If you have a spudger tool, insert the tip under the edge of the keycap and carefully pry it up. This method is especially useful for removing small, low-profile keycaps.
Safety Precautions
Unplug the keyboard from the computer before attempting to remove a key.
Use a plastic spudger or a flat-head screwdriver to gently pry the keycap up from the switch.
Be careful not to damage the switch or the keycap.
If the keycap is stuck, do not use excessive force.
If you are unsure how to remove a key, consult the Logitech support website or a qualified technician.
Do not attempt to remove a key if the keyboard is still plugged in.
Do not use a metal object to pry the keycap up.
Do not use excessive force when removing the keycap.
If the keycap is damaged, do not replace it. Contact Logitech for a replacement.
If you have any other questions, please refer to the Logitech support website or contact a qualified technician.
Additional Safety Precautions for Removing Keys on the Logitech Ergo Keyboard
The Logitech Ergo keyboard has a unique design that makes it slightly different to remove keys compared to other keyboards.
Here are some additional safety precautions to keep in mind:
| Step | Precaution |
|---|---|
| 1 | Make sure the keyboard is unplugged from the computer. |
| 2 | Use a plastic spudger or a flat-head screwdriver to gently pry the keycap up from the switch. Be careful not to damage the switch or the keycap. |
| 3 | If the keycap is stuck, do not use excessive force. |
| 4 | If you are unsure how to remove a key, consult the Logitech support website or a qualified technician. |
| 5 | Do not attempt to remove a key if the keyboard is still plugged in. |
| 6 | Do not use a metal object to pry the keycap up. |
| 7 | Do not use excessive force when removing the keycap. |
| 8 | If the keycap is damaged, do not replace it. Contact Logitech for a replacement. |
| 9 | If you have any other questions, please refer to the Logitech support website or contact a qualified technician. |
| 10 | Take extra care when removing keys from the top row of the keyboard, as they are more delicate and prone to damage. |
How To Remove Key – Logitech Ergo
Step 1: Flip the keyboard over
Flip the keyboard over so that the bottom is facing up.
Step 2: Locate the key removal tool
The key removal tool is a small, plastic tool that is located in the top-right corner of the keyboard.
Step 3: Insert the key removal tool into the key
Insert the key removal tool into the small hole that is located at the bottom of the key.
Step 4: Push down on the key removal tool
Push down on the key removal tool until you hear a click.
Step 5: Pull up on the key
Pull up on the key to remove it from the keyboard.
