Losing the combination to your Sentry Safe can be a stressful experience. However, there is no need to panic. With a few simple steps, you can reset the combination and regain access to your valuables. Resetting the combination on a Sentry Safe is a straightforward process that can be completed in just a few minutes. However, it is important to note that the steps may vary slightly depending on the model of your safe. Before you begin, it is important to gather the necessary tools. You will need a small Phillips head screwdriver and a pen or pencil.
Once you have gathered the necessary tools, you can begin the process of resetting the combination. Begin by locating the reset button on the inside of the safe door. The reset button is typically located near the bottom of the door, behind a small plastic cover. Once you have located the reset button, use the screwdriver to remove the plastic cover. With the plastic cover removed, you will see a small metal button. Press and hold the metal button for approximately 10 seconds. While holding the button, turn the dial clockwise to the first number of your new combination. Release the button and turn the dial counterclockwise to the second number of your new combination. Repeat this process for the third and fourth numbers of your new combination.
Once you have entered your new combination, turn the dial clockwise to lock the safe. Your new combination is now set. It is important to keep your new combination in a safe place, such as a written record or a password manager. Additionally, it is a good idea to test your new combination several times to ensure that it is working properly. If you have any difficulty resetting the combination on your Sentry Safe, please consult the user manual or contact Sentry Safe customer service for assistance.
Disengaging the Reset Tool
To disengage the reset tool, follow these detailed steps:
- Turn the combination dial clockwise until the combination number is aligned with the indicator mark.
- Gently push the reset tool into the hole located next to the combination dial.
- While pushing the reset tool in, turn the combination dial counterclockwise one full turn.
- Continue holding the reset tool in and turn the combination dial clockwise one-quarter turn.
- Release the reset tool, and the combination lock will be disengaged.
Additional Tips:
- If the reset tool does not fit snugly into the hole, try using a small screwdriver or another thin object to push the tool in.
- Be sure to turn the combination dial slowly and carefully to avoid damaging the lock.
- If you encounter any difficulties, refer to the Sentry Safe user manual or contact Sentry Safe customer support for assistance.
Testing the New Combination
Once you have successfully reset the combination, it’s essential to test it to ensure it’s working correctly. Follow these steps to test the new combination:
-
Close the Safe: Begin by closing the safe door securely.
-
Dial the Reset Code: Enter the reset code you used earlier (e.g., "0000") by rotating the dial clockwise.
Note: For some models, you may need to spin the dial past the reset code and then back to it. Consult your safe’s user manual for specific instructions.
-
Turn the Dial Counterclockwise: Rotate the dial to the left, aligning it with the second number of the new combination (e.g., "2").
-
Turn the Dial Clockwise: Continue turning the dial clockwise, aligning it with the third number of the new combination (e.g., "6").
-
Turn the Dial Counterclockwise: Once again, rotate the dial to the left, aligning it with the fourth number of the new combination (e.g., "8").
-
Turn the Dial Clockwise: Finally, turn the dial one last time clockwise, stopping at the fifth number of the new combination (e.g., "0").
-
Pull Open the Door: If you have entered the correct combination, the door of the safe should now open. If the door remains closed, double-check your steps and verify that you entered the correct combination.
Note: It’s recommended to practice opening the safe several times with the new combination to ensure you can access it quickly and easily in an emergency.
| Step | Action |
|---|---|
| 1 | Close the safe door. |
| 2 | Dial the reset code (e.g., “0000”). |
| 3 | Turn the dial counterclockwise to the second number of the new combination. |
| 4 | Turn the dial clockwise to the third number of the new combination. |
| 5 | Turn the dial counterclockwise to the fourth number of the new combination. |
| 6 | Turn the dial clockwise to the fifth number of the new combination. |
| 7 | Pull open the door. |
Sentry Safe How To Reset Combination
To reset the combination on your Sentry safe, you need to follow these steps:
- Enter the current known combination.
- Push the Override button.
- Create a new combination using the dials. Ensure to rotate the dials at least three times to the right or left between each number.
- Push the Override button again to save the new combination.
- Close the door and relock the safe.
Note: If you have lost or forgotten the current combination, you will need to contact Sentry Safe for assistance.
People Also Ask About Sentry Safe How To Reset Combination
How do I reset my Sentry safe if I have lost the key?
If you have lost the key to your Sentry safe, you will need to contact Sentry Safe for assistance. They can provide you with a replacement key or help you reset the combination.
Can I change the combination on my Sentry safe without knowing the current one?
No, you cannot change the combination on your Sentry safe without knowing the current one. If you have lost or forgotten the current combination, you will need to contact Sentry Safe for assistance.
How often should I change the combination on my Sentry safe?
It is recommended that you change the combination on your Sentry safe every six months or so. This will help to keep your safe secure and prevent unauthorized access.
